collector_left
→ Light signal decoder, Signal aspect generators 2011 light signal decoder for swiss type L signals
| Light signal decoder Swiss signal type L |
|
Page 1 of 6 The signal system L is the traditional light signal system of the swiss railway. It is in use for several decades. A characteristics of this system is that both Stop and Approach, as well as speed information are shown by one or more coloured lights. There is a distinction between main and approach signals. Main signals permit or prohibit to drive on, and show the permitted maximum speed. Approach signals are in breaking distance to the main signal and show which Stop or Approach aspect is to be expected at the main signal. Of particular interest are the combination signals that can represent both approach and main signal aspect. The flyer for the Swiss signals type L shows the configuration. Decoder of the Z1-series (standard and all-in-one classes) are the actual light signal decoder of the Qdecoder. Before using them on the model railway, they need to be configured. In the simplest case this is done with the programming button. However, often an additional programming with configuration variables is required. If signal aspects should be displayed, this programming can get an extensive job. You can manually configure the decoder yourself, or you acquire a pre-configures Qdecoder-light decoder and save the configuration of the configuration variables. Sales and service in Switzerland is done by our partner www.qdecoder.ch. Currently, there are the following pre-configured decoder in the light signal decoder shop:
|
